Large Flow 600 GPD Household RO Membrane for Water Filter RO System
Reverse osmosis membranes can be used for a variety of fluid
separations. Currently, the most widely used reverse osmosis
membranes are cross-linked aromatic polyamide reverse osmosis
membranes. Usually, m-phenylenediamine and trimesoyl chloride are
used for interfacial polycondensation on the surface of porous
polysulfone supported membranes. A polyamide layer is formed. The
polyamide layer obtained by the reaction is the key to influence
the water permeability and salt retardation rate. Therefore,
focusing on the interfacial polycondensation reaction and
optimizing the polyamide layer in order to obtain a reverse osmosis
membrane with large flux and high salt removal rate has always been
the direction of many researchers.
| TYPE | BW-3013-400 | BW-3013-600 | BW-3013-800 |
| Rejection Rate | 95% | 95% | 95% |
| Permeate Flow GPD(m³) | 400(1.52) | 600(2.28) | 800(3.04) |
| Test Pressure | 100psi(0.68) |
| Max. Feedwater TDS | 1000 |
| PH Rate Rang of Operation | 2-11 |
| Max. Operation Temperature | 45ºC |
| Recovery Rate of Single Membrane | 50% |
Note:1. The Max. continous operation temperature is 35ºC when PH
rate over 10.
2. In certain conditions,if would cause membrane breakage if the
free chlorine or the other oxidant in feedwater.The production
quality guarantee range is notincluded membrane breakage by
oxiadation.
With the rapid development of reverse osmosis membrane technology
and the in-depth use of membrane elements, the development and
preparation of large-flux reverse osmosis membranes has gradually
become the focus of research. Large throughput means that the
energy consumption required to process the same volume of liquid is
low, which can effectively save investment and equipment operating
costs, and improve processing efficiency.
FAQ:
Q: How to buy your products?
A: we need some essential information include sewage sources,
sewage quality ( COD, BOD,SS),Required Filtered water quality,
designed technological process, site engineering conditions
(contact us for details),then we will design the uitable solutions
for you and prepare to give you best price.
Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30%
deposit before producing, 70% balanced against the copy of B/L.
Q: What is the delivery time?
A: Usually within 15days. Also depends on order quantities.
Q: Can the package be customized by our own logo ?
A: Yes, the package can be customized your logo, but the MOQ will
be higher for which we can discuss as per the specific orders.
Q: How to install after the products arriving destination?
A: We will provide detailed illustrations to you. And we can also
provide guide to your workers how to use it and how to maintain
it.
Q:What's the certification do you have?
A: We have NSF, ISO9001, OHSAS18001, ISO14001 Certifications.
