Domestic / Commercial High Flow 3013 - 500 Gpd Reverse Osmosis RO
Membrane
A reverse osmosis membrane is a semi-permeable membrane that allows the passage of water
molecules but not the majority of dissolved salts, organics,
bacteria and pyrogens.
An RO membrane is composed of three layers: a bottom layer made of unwoven polyester cloth of thickness
100–200 μm to support the entire membrane, a middle layer
consisting of polysulfone (PSF) or polyethersulfone (PES) of
thickness 30–50 μm, and a top layer of polyamide (PA) or
polyetherimide (PEI), supported by PSF ...
Product Specification
| Model | 3013-500 |
| Performance | Stable Desalination Rate% | 96 |
| Average permeate Flow GPD | 500 |
| Test Conditions | Test Pressure | 0.6Mpa |
| Test Temperature | 25±1ºC |
| Test Solution(NaCl) | 250±50ppm |
| Test solution pH | 6.5-7.5 |
| Single Membrane Element Recovery Rate | 50±5% |
Operating Limit:
| Maximum Operating Temperature | 113ºF(45ºC) |
| Maximum Working Pressure | 150psi(10bar) |
| Maximum Feed Flow | 2.0gpm(7.6lpm) |
| Continuously operating PH range a | 2-11 |
| Short wash PH range (30min) b | 1-13 |
| Maximum feed water SDI | SDI 5 |
| Tolerance Of Free Chlorine | <0.1ppm |
Note:1. The Max. continous operation temperature is 35ºC when PH
rate over 10.
2. In certain conditions,if would cause membrane breakage if the
free chlorine or the other oxidant in feedwater.The production
quality guarantee range is notincluded membrane breakage by
oxiadation.
Reverse Osmosis Membrane – Change the reverse osmosis membrane every 24 months. Carbon Post Filter – Change this filter every 12 months to ensure
quality water.
Procedures
FAQ:
Q: How to buy your products?
A: we need some essential information include sewage sources,
sewage quality ( COD, BOD,SS),Required Filtered water quality,
designed technological process, site engineering conditions
(contact us for details),then we will design the uitable solutions
for you and prepare to give you best price.
Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30%
deposit before producing, 70% balanced against the copy of B/L.
Q: What is the delivery time?
A: Usually within 15days. Also depends on order quantities.
Q: Can the package be customized by our own logo ?
A: Yes, the package can be customized your logo, but the MOQ will
be higher for which we can discuss as per the specific orders.
Q: How to install after the products arriving destination?
A: We will provide detailed illustrations to you. And we can also
provide guide to your workers how to use it and how to maintain
it.
Q:What's the certification do you have?
A: We have NSF, ISO9001, OHSAS18001, ISO14001 Certifications.
